$41.58
Original: $138.60
-70%Elite 20kg Olympic Barbell (1000LB Capacity)—
$138.60
$41.58The Story
Olympic Barbell
In Stock
Australia Wide Delivery
Elite 20kg Olympic Barbell2200mm Commercial-Grade Bar for Powerlifting and Olympic Lifting
The Elite 20kg Olympic Barbell is built for lifters who want a dependable 2200mm bar that handles squats, deadlifts, bench press and Olympic lifts without flexing or losing knurl over time. It suits home gym owners upgrading from a budget bar, as well as PT studios and commercial gyms that need a barbell capable of daily use.
One of the most common questions buyers ask before choosing an Olympic barbell in Australia is whether the sleeves will spin smoothly under load and whether the knurling will hold up to regular chalk and sweat. This bar uses needle bearing sleeves and a black zinc finish to address both concerns, and every specification below is listed as supplied, with any unconfirmed figure marked clearly so you know exactly what you are buying.
20KG
Bar Weight
2200MM
Total Length
25MM
Shaft Diameter
50MM
Sleeve Diameter
What Comes With Your Barbell
20kg Olympic Barbell2200mm bar with 50mm Olympic sleeves
Protective PackagingShipped in reinforced packaging to prevent transit damage
CollarsTo confirm whether spring or lock-jaw collars are included
Care GuidanceBasic maintenance notes for storage and cleaning
Built for Serious, Repeated Use
Full 2200mm Olympic LengthFits standard Olympic racks, benches and plates without modification.
Needle Bearing SleevesSmooths out sleeve rotation during Olympic lifts and fast eccentric movement.
Centre KnurlImproves bar security on the back during squats.
Black Zinc FinishAdds corrosion resistance and a consistent grip surface over time.
25mm Shaft DiameterStandard men's competition diameter for a familiar grip.
50mm Sleeve DiameterCompatible with all standard Olympic weight plates.
Engineering and build quality. The Elite 20kg Olympic Barbell uses a steel shaft with a black zinc finish for corrosion resistance and grip consistency. Tensile strength rating, sleeve bearing count and load capacity are listed in the specifications table below where confirmed, and marked "To confirm" where the figure has not been independently verified. We would rather give you an accurate answer than an impressive-sounding one.
Technical Specifications
Full Specification Sheet
| Total Length | 2,200mm |
| Loadable Sleeve Length | 445mm per side |
| Inner Sleeve Space | 1,310mm |
| Bar Weight | 20kg |
| Shaft Diameter | 25mm |
| Sleeve Diameter | 50mm |
| Finish | Black zinc coating |
| Sleeve Bearings | To confirm (needle bearing sleeve design) |
| Tensile Strength Rating | To confirm |
| Load / Weight Capacity | To confirm |
| Knurl Pattern | Dual knurl marks with centre knurl |
| Warranty | To confirm |
Pros
- Full 2200mm length suits all standard Olympic racks and benches
- Needle bearing sleeves give smoother rotation than bushing-only bars
- Black zinc finish resists corrosion better than bare steel
- Centre knurl adds back security for squats
- Suits both Olympic lifting and powerlifting movements
Cons
- Load capacity and tensile strength are not yet confirmed by the supplier
- Collars are not confirmed as included, so check before assuming a full set-up
- At 20kg the bar is heavy to manoeuvre solo for wall-mounted rack storage
- Black zinc finish requires occasional wipe-down to maintain appearance long term
Who Is This Barbell For
- Home gym ownersupgrading from a budget bar who want smoother sleeve rotation and a proper Olympic-length shaft.
- Powerlifterstraining squat, bench and deadlift who need a stiff, reliable 2200mm bar for heavy singles.
- Olympic lifterswho rely on fast sleeve spin for clean and jerk or snatch technique work.
- Personal trainers and small studiosneeding one durable, multi-purpose bar that handles a wide range of client programming.
- Garage gym builderssetting up a first proper rack and bench combo who want a bar that will not need replacing quickly.
Who should not buy this barbell. If you specifically need a certified competition bar with documented IWF or IPF specification sheets for sanctioned meets, this listing is not currently sold with that certification confirmed, so a dedicated competition bar would be a safer choice. If you are after a specialty bar such as a safety squat bar, trap bar or curl bar, this straight Olympic bar will not cover those movement patterns.
The real concern: will it spin and hold up? Most complaints about cheaper Olympic barbells come down to two things, sleeves that bind up instead of spinning, and knurling that goes smooth within a year. The Elite 20kg Olympic Barbell uses needle bearing sleeves to address rotation and a black zinc finish to protect the knurl pattern over repeated use, so you are not stuck replacing a bar within the first twelve months of regular training.
Visit Our Showroom
See It in Person
Visit Us
10/202 Milperra Road, Milperra NSW 2214
Mon–Fri 9am–5pm | Saturday by appointment only | Sunday closed
Get Directions
Depot Pickup
Also available in Derrimut (Melbourne) and Archerfield (Brisbane)
Getting It to You
Australia Wide
Ships nationally including Sydney, Melbourne, Brisbane, Adelaide and Perth
Installation
Not required, this is a standalone barbell that arrives ready to use
Dispatch Time
To confirm current stock and dispatch lead time at checkout
Complete Your Setup
Browse our full range of barbells and weight sets→
Browse our power racks and squat stands→
Browse our rubber gym flooring→
Browse our dumbbells and dumbbell racks→
Frequently Asked Questions
Common Questions
It suits both. The 2200mm Olympic length and 20kg weight make it a standard fit for home gym racks and benches, and the build is also suitable for commercial gym and PT studio use.
The bar itself is 2,200mm in total length. You will need a rack, bench or floor space long enough to load and manoeuvre a 2200mm bar safely, which is standard for any home gym built around Olympic-length equipment.
You receive the 20kg Olympic barbell itself, shipped in protective packaging. Whether collars are included is currently to confirm, so check with our team before assuming a full set-up is supplied.
Yes. The 50mm sleeve diameter is the standard Olympic sleeve size, so it is compatible with standard Olympic weight plates.
The exact load and tensile strength rating for this bar is currently to confirm. We would rather give you an accurate figure once verified than guess at a number, so please contact our team if this is critical to your purchase decision.
It is designed for squats, bench press, deadlifts, Olympic lifts such as the clean and jerk and snatch, and general strength and conditioning work including CrossFit-style training.
Yes, we ship Australia wide including Sydney, Melbourne, Brisbane, Adelaide and Perth. Exact dispatch timing is to confirm at checkout based on current stock.
Yes, you are welcome to view it at our Milperra showroom, 10/202 Milperra Road, Milperra NSW 2214, open Monday to Friday 9am to 5pm, with Saturday visits by appointment only.
Warranty terms for this specific barbell are currently to confirm. Please contact our team on 1300 247 888 or [email protected] for the latest warranty information before purchasing.
It depends on what you need. A cheaper bar may be fine for occasional light use, but if you train regularly, sleeve rotation and knurl durability tend to matter more over time. This bar's needle bearing sleeves and black zinc finish are aimed at addressing both of those common failure points.
At minimum you will want a set of Olympic weight plates and a pair of collars if they are not included with this listing. Most buyers also pair an Olympic barbell with a power rack or squat stand and a bench.
For a 2200mm Olympic bar with needle bearing sleeves and a corrosion-resistant black zinc finish, it represents a solid mid-tier option for home gym owners and studios who want better performance than an entry-level bar without paying competition bar pricing.
Australia wide delivery. We supply and deliver the Elite 20kg Olympic Barbell across Sydney, Melbourne, Brisbane, Adelaide, Canberra, the Gold Coast, Newcastle, Wollongong, Hobart and regional Australia. Visit our Milperra showroom in Sydney to see it in person, or get in touch and we will help you get set up wherever you are.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Description
Olympic Barbell
In Stock
Australia Wide Delivery
Elite 20kg Olympic Barbell2200mm Commercial-Grade Bar for Powerlifting and Olympic Lifting
The Elite 20kg Olympic Barbell is built for lifters who want a dependable 2200mm bar that handles squats, deadlifts, bench press and Olympic lifts without flexing or losing knurl over time. It suits home gym owners upgrading from a budget bar, as well as PT studios and commercial gyms that need a barbell capable of daily use.
One of the most common questions buyers ask before choosing an Olympic barbell in Australia is whether the sleeves will spin smoothly under load and whether the knurling will hold up to regular chalk and sweat. This bar uses needle bearing sleeves and a black zinc finish to address both concerns, and every specification below is listed as supplied, with any unconfirmed figure marked clearly so you know exactly what you are buying.
20KG
Bar Weight
2200MM
Total Length
25MM
Shaft Diameter
50MM
Sleeve Diameter
What Comes With Your Barbell
20kg Olympic Barbell2200mm bar with 50mm Olympic sleeves
Protective PackagingShipped in reinforced packaging to prevent transit damage
CollarsTo confirm whether spring or lock-jaw collars are included
Care GuidanceBasic maintenance notes for storage and cleaning
Built for Serious, Repeated Use
Full 2200mm Olympic LengthFits standard Olympic racks, benches and plates without modification.
Needle Bearing SleevesSmooths out sleeve rotation during Olympic lifts and fast eccentric movement.
Centre KnurlImproves bar security on the back during squats.
Black Zinc FinishAdds corrosion resistance and a consistent grip surface over time.
25mm Shaft DiameterStandard men's competition diameter for a familiar grip.
50mm Sleeve DiameterCompatible with all standard Olympic weight plates.
Engineering and build quality. The Elite 20kg Olympic Barbell uses a steel shaft with a black zinc finish for corrosion resistance and grip consistency. Tensile strength rating, sleeve bearing count and load capacity are listed in the specifications table below where confirmed, and marked "To confirm" where the figure has not been independently verified. We would rather give you an accurate answer than an impressive-sounding one.
Technical Specifications
Full Specification Sheet
| Total Length | 2,200mm |
| Loadable Sleeve Length | 445mm per side |
| Inner Sleeve Space | 1,310mm |
| Bar Weight | 20kg |
| Shaft Diameter | 25mm |
| Sleeve Diameter | 50mm |
| Finish | Black zinc coating |
| Sleeve Bearings | To confirm (needle bearing sleeve design) |
| Tensile Strength Rating | To confirm |
| Load / Weight Capacity | To confirm |
| Knurl Pattern | Dual knurl marks with centre knurl |
| Warranty | To confirm |
Pros
- Full 2200mm length suits all standard Olympic racks and benches
- Needle bearing sleeves give smoother rotation than bushing-only bars
- Black zinc finish resists corrosion better than bare steel
- Centre knurl adds back security for squats
- Suits both Olympic lifting and powerlifting movements
Cons
- Load capacity and tensile strength are not yet confirmed by the supplier
- Collars are not confirmed as included, so check before assuming a full set-up
- At 20kg the bar is heavy to manoeuvre solo for wall-mounted rack storage
- Black zinc finish requires occasional wipe-down to maintain appearance long term
Who Is This Barbell For
- Home gym ownersupgrading from a budget bar who want smoother sleeve rotation and a proper Olympic-length shaft.
- Powerlifterstraining squat, bench and deadlift who need a stiff, reliable 2200mm bar for heavy singles.
- Olympic lifterswho rely on fast sleeve spin for clean and jerk or snatch technique work.
- Personal trainers and small studiosneeding one durable, multi-purpose bar that handles a wide range of client programming.
- Garage gym builderssetting up a first proper rack and bench combo who want a bar that will not need replacing quickly.
Who should not buy this barbell. If you specifically need a certified competition bar with documented IWF or IPF specification sheets for sanctioned meets, this listing is not currently sold with that certification confirmed, so a dedicated competition bar would be a safer choice. If you are after a specialty bar such as a safety squat bar, trap bar or curl bar, this straight Olympic bar will not cover those movement patterns.
The real concern: will it spin and hold up? Most complaints about cheaper Olympic barbells come down to two things, sleeves that bind up instead of spinning, and knurling that goes smooth within a year. The Elite 20kg Olympic Barbell uses needle bearing sleeves to address rotation and a black zinc finish to protect the knurl pattern over repeated use, so you are not stuck replacing a bar within the first twelve months of regular training.
Visit Our Showroom
See It in Person
Visit Us
10/202 Milperra Road, Milperra NSW 2214
Mon–Fri 9am–5pm | Saturday by appointment only | Sunday closed
Get Directions
Depot Pickup
Also available in Derrimut (Melbourne) and Archerfield (Brisbane)
Getting It to You
Australia Wide
Ships nationally including Sydney, Melbourne, Brisbane, Adelaide and Perth
Installation
Not required, this is a standalone barbell that arrives ready to use
Dispatch Time
To confirm current stock and dispatch lead time at checkout
Complete Your Setup
Browse our full range of barbells and weight sets→
Browse our power racks and squat stands→
Browse our rubber gym flooring→
Browse our dumbbells and dumbbell racks→
Frequently Asked Questions
Common Questions
It suits both. The 2200mm Olympic length and 20kg weight make it a standard fit for home gym racks and benches, and the build is also suitable for commercial gym and PT studio use.
The bar itself is 2,200mm in total length. You will need a rack, bench or floor space long enough to load and manoeuvre a 2200mm bar safely, which is standard for any home gym built around Olympic-length equipment.
You receive the 20kg Olympic barbell itself, shipped in protective packaging. Whether collars are included is currently to confirm, so check with our team before assuming a full set-up is supplied.
Yes. The 50mm sleeve diameter is the standard Olympic sleeve size, so it is compatible with standard Olympic weight plates.
The exact load and tensile strength rating for this bar is currently to confirm. We would rather give you an accurate figure once verified than guess at a number, so please contact our team if this is critical to your purchase decision.
It is designed for squats, bench press, deadlifts, Olympic lifts such as the clean and jerk and snatch, and general strength and conditioning work including CrossFit-style training.
Yes, we ship Australia wide including Sydney, Melbourne, Brisbane, Adelaide and Perth. Exact dispatch timing is to confirm at checkout based on current stock.
Yes, you are welcome to view it at our Milperra showroom, 10/202 Milperra Road, Milperra NSW 2214, open Monday to Friday 9am to 5pm, with Saturday visits by appointment only.
Warranty terms for this specific barbell are currently to confirm. Please contact our team on 1300 247 888 or [email protected] for the latest warranty information before purchasing.
It depends on what you need. A cheaper bar may be fine for occasional light use, but if you train regularly, sleeve rotation and knurl durability tend to matter more over time. This bar's needle bearing sleeves and black zinc finish are aimed at addressing both of those common failure points.
At minimum you will want a set of Olympic weight plates and a pair of collars if they are not included with this listing. Most buyers also pair an Olympic barbell with a power rack or squat stand and a bench.
For a 2200mm Olympic bar with needle bearing sleeves and a corrosion-resistant black zinc finish, it represents a solid mid-tier option for home gym owners and studios who want better performance than an entry-level bar without paying competition bar pricing.
Australia wide delivery. We supply and deliver the Elite 20kg Olympic Barbell across Sydney, Melbourne, Brisbane, Adelaide, Canberra, the Gold Coast, Newcastle, Wollongong, Hobart and regional Australia. Visit our Milperra showroom in Sydney to see it in person, or get in touch and we will help you get set up wherever you are.
