$34.32
Original: $114.40
-70%WALL MOUNTED MULTI ANGLE PULL UP BAR—
$114.40
$34.32The Story
In Stock — Ships Today 200KG Rated Multi-Grip Free Mounting Hardware
Wall Mounted Pull-Up Bar – Multi-Grip Heavy Duty
Commercial-grade 200kg rated multi-grip pull-up bar. Six grip positions, 120cm wide, built for serious upper-body training at home.
A no-compromise wall mounted pull-up bar built for daily heavy use. The multi-grip frame gives you six clean hand positions — wide, narrow, neutral, angled and parallel — so you can run a full pull, chin and hammer rotation from a single fixed station. Rated to 200kg and finished in electrostatic black powder coat, this bar handles weighted pull-ups, kipping, muscle-ups and band assistance without flex or rattle.
The Numbers
200 KG Rated
120 cm Width
61.5 cm Depth
6 Grip Positions
Why This Pull-Up Bar
Six Grip Positions
Wide overhand, close underhand, neutral parallel and angled grips for full lat, back, bicep and forearm development.
200KG Rated Frame
Commercial-grade steel rated well beyond bodyweight — built for weighted vests, belt loads and dynamic muscle-ups.
Rust-Resistant Finish
Electrostatic black powder coat for indoor garages and covered outdoor installations.
Compact Footprint
Mounts flush to the wall, 47cm projection, frees the entire floor below for benches, racks or flooring.
Hardware Included
All mounting bolts and fixings supplied — ready to install on brick, concrete or reinforced stud walls.
Rig-Ready Anchor Point
Use as an anchor for resistance bands, gymnastic rings, suspension trainers and ab straps.
Mounting Surface Check This bar carries serious load. Mount only to solid brick, concrete, or timber-stud walls reinforced with appropriate blocking. Plasterboard alone is not suitable. We recommend installation by a qualified tradesperson.
Exercises You Can Train
Wide Grip Pull-Ups
Close Grip Chin-Ups
Neutral Grip Pull-Ups
Hammer Grip Pull-Ups
Weighted Pull-Ups
Muscle-Ups
Kipping Pull-Ups
Hanging Leg Raises
Toes-to-Bar
L-Sit Holds
Dead Hangs
Band Assisted Pulls
Full Specifications
| Specification | Detail |
|---|---|
| Width | 1200mm (120cm) |
| Depth from wall | 615mm (61.5cm) |
| Bracket height | 470mm (47cm) |
| Product weight | 12kg |
| Weight capacity | 200kg |
| Grip positions | 6 (wide, narrow, neutral, angled, parallel) |
| Frame material | Commercial-grade steel |
| Finish | Electrostatic black powder coat |
| Mounting surface | Brick, concrete, or reinforced timber stud |
| Mounting hardware | Included |
| Use | Indoor and covered outdoor |
Who It's For
- Home gym owners wanting a compact, permanent upper-body station that handles heavy use
- Calisthenics athletes training muscle-ups, levers, and weighted pull-up progressions
- Powerlifters and bodybuilders adding weighted pull-ups with belts, vests, or chains
- CrossFit athletes needing a 200kg rated bar for kipping and butterfly pull-ups
- PTs and small studios with multiple clients across all weight ranges
- Garage and shed setups short on floor space but heavy on training intent
Frequently Asked Questions
Can I do dips on this bar?
No, this is a pull-up bar only — there is no dip station attached. For dips, pair this with a dedicated dip station or look at our squat rack and matrix rack dip attachments.
Can this bar be used outdoors?
Yes, under cover. The electrostatic black powder coat resists rust in covered outdoor setups like patios and pergolas. For fully exposed or coastal locations, periodic inspection is recommended.
What's the maximum weight capacity?
The bar is rated to 200kg — significantly higher than most home-grade bars on the market (typically 90–150kg). This headroom makes it ideal for weighted pull-ups, dynamic muscle-ups, and heavier users.
Does it come with mounting hardware?
Yes — all mounting bolts and fixings required to secure the bar to brick, concrete, or reinforced stud walls are included in the box.
What walls can I mount it on?
Solid brick, concrete, or timber-stud walls with appropriate reinforcement. Plasterboard alone will not hold the load. If you're unsure about your wall, consult a qualified builder before installing.
How far does it project from the wall?
61.5cm at the deepest point, with a 47cm bracket drop. That gives full clearance for pull-ups, kipping, and muscle-up rotation without your knees or feet hitting the wall.
How wide is the bar?
120cm total width. The widest grip is right at the outer edges; narrower and neutral grips sit in toward the centre.
Is this suitable for beginners?
Yes. Beginners can use resistance bands looped over the bar for assisted pull-ups, then progress through chin-ups to full pull-ups and weighted variations as strength builds.
Can I attach rings, bands, or a suspension trainer?
Yes. The bar works as a fixed anchor point for gymnastic rings, resistance bands, TRX-style suspension trainers, and ab straps.
How long does delivery take?
Sydney metro: 1–3 business days. Brisbane, Melbourne, Canberra: 3–5 business days. Perth, Adelaide, Hobart, Darwin and regional: 5–10 business days. In-stock orders dispatch same day when placed before 12pm AEST.
Visit Our Sydney Showroom
See the wall mounted pull-up bar in person at our Milperra showroom. Test the grips, check the build quality, and talk to the team before you buy.
Get directions →
Address10/202 Milperra Road, Milperra NSW 2214
HoursMon–Fri 9am–5pm
Sat 9am–1pm
Phone1300 247 888
WhatsApp+61 412 029 000
Email[email protected]
Fast Australia-wide delivery from our Sydney warehouse — serving Sydney, Parramatta, Liverpool, Bankstown, Penrith, Wollongong, Newcastle, the Central Coast, Brisbane, Gold Coast, Melbourne, Geelong, Adelaide, Perth, Canberra, Hobart, Darwin and all regional postcodes.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Description
In Stock — Ships Today 200KG Rated Multi-Grip Free Mounting Hardware
Wall Mounted Pull-Up Bar – Multi-Grip Heavy Duty
Commercial-grade 200kg rated multi-grip pull-up bar. Six grip positions, 120cm wide, built for serious upper-body training at home.
A no-compromise wall mounted pull-up bar built for daily heavy use. The multi-grip frame gives you six clean hand positions — wide, narrow, neutral, angled and parallel — so you can run a full pull, chin and hammer rotation from a single fixed station. Rated to 200kg and finished in electrostatic black powder coat, this bar handles weighted pull-ups, kipping, muscle-ups and band assistance without flex or rattle.
The Numbers
200 KG Rated
120 cm Width
61.5 cm Depth
6 Grip Positions
Why This Pull-Up Bar
Six Grip Positions
Wide overhand, close underhand, neutral parallel and angled grips for full lat, back, bicep and forearm development.
200KG Rated Frame
Commercial-grade steel rated well beyond bodyweight — built for weighted vests, belt loads and dynamic muscle-ups.
Rust-Resistant Finish
Electrostatic black powder coat for indoor garages and covered outdoor installations.
Compact Footprint
Mounts flush to the wall, 47cm projection, frees the entire floor below for benches, racks or flooring.
Hardware Included
All mounting bolts and fixings supplied — ready to install on brick, concrete or reinforced stud walls.
Rig-Ready Anchor Point
Use as an anchor for resistance bands, gymnastic rings, suspension trainers and ab straps.
Mounting Surface Check This bar carries serious load. Mount only to solid brick, concrete, or timber-stud walls reinforced with appropriate blocking. Plasterboard alone is not suitable. We recommend installation by a qualified tradesperson.
Exercises You Can Train
Wide Grip Pull-Ups
Close Grip Chin-Ups
Neutral Grip Pull-Ups
Hammer Grip Pull-Ups
Weighted Pull-Ups
Muscle-Ups
Kipping Pull-Ups
Hanging Leg Raises
Toes-to-Bar
L-Sit Holds
Dead Hangs
Band Assisted Pulls
Full Specifications
| Specification | Detail |
|---|---|
| Width | 1200mm (120cm) |
| Depth from wall | 615mm (61.5cm) |
| Bracket height | 470mm (47cm) |
| Product weight | 12kg |
| Weight capacity | 200kg |
| Grip positions | 6 (wide, narrow, neutral, angled, parallel) |
| Frame material | Commercial-grade steel |
| Finish | Electrostatic black powder coat |
| Mounting surface | Brick, concrete, or reinforced timber stud |
| Mounting hardware | Included |
| Use | Indoor and covered outdoor |
Who It's For
- Home gym owners wanting a compact, permanent upper-body station that handles heavy use
- Calisthenics athletes training muscle-ups, levers, and weighted pull-up progressions
- Powerlifters and bodybuilders adding weighted pull-ups with belts, vests, or chains
- CrossFit athletes needing a 200kg rated bar for kipping and butterfly pull-ups
- PTs and small studios with multiple clients across all weight ranges
- Garage and shed setups short on floor space but heavy on training intent
Frequently Asked Questions
Can I do dips on this bar?
No, this is a pull-up bar only — there is no dip station attached. For dips, pair this with a dedicated dip station or look at our squat rack and matrix rack dip attachments.
Can this bar be used outdoors?
Yes, under cover. The electrostatic black powder coat resists rust in covered outdoor setups like patios and pergolas. For fully exposed or coastal locations, periodic inspection is recommended.
What's the maximum weight capacity?
The bar is rated to 200kg — significantly higher than most home-grade bars on the market (typically 90–150kg). This headroom makes it ideal for weighted pull-ups, dynamic muscle-ups, and heavier users.
Does it come with mounting hardware?
Yes — all mounting bolts and fixings required to secure the bar to brick, concrete, or reinforced stud walls are included in the box.
What walls can I mount it on?
Solid brick, concrete, or timber-stud walls with appropriate reinforcement. Plasterboard alone will not hold the load. If you're unsure about your wall, consult a qualified builder before installing.
How far does it project from the wall?
61.5cm at the deepest point, with a 47cm bracket drop. That gives full clearance for pull-ups, kipping, and muscle-up rotation without your knees or feet hitting the wall.
How wide is the bar?
120cm total width. The widest grip is right at the outer edges; narrower and neutral grips sit in toward the centre.
Is this suitable for beginners?
Yes. Beginners can use resistance bands looped over the bar for assisted pull-ups, then progress through chin-ups to full pull-ups and weighted variations as strength builds.
Can I attach rings, bands, or a suspension trainer?
Yes. The bar works as a fixed anchor point for gymnastic rings, resistance bands, TRX-style suspension trainers, and ab straps.
How long does delivery take?
Sydney metro: 1–3 business days. Brisbane, Melbourne, Canberra: 3–5 business days. Perth, Adelaide, Hobart, Darwin and regional: 5–10 business days. In-stock orders dispatch same day when placed before 12pm AEST.
Visit Our Sydney Showroom
See the wall mounted pull-up bar in person at our Milperra showroom. Test the grips, check the build quality, and talk to the team before you buy.
Get directions →
Address10/202 Milperra Road, Milperra NSW 2214
HoursMon–Fri 9am–5pm
Sat 9am–1pm
Phone1300 247 888
WhatsApp+61 412 029 000
Email[email protected]
Fast Australia-wide delivery from our Sydney warehouse — serving Sydney, Parramatta, Liverpool, Bankstown, Penrith, Wollongong, Newcastle, the Central Coast, Brisbane, Gold Coast, Melbourne, Geelong, Adelaide, Perth, Canberra, Hobart, Darwin and all regional postcodes.
